| Customization: | Available |
|---|---|
| After-sales Service: | Agent Serive |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The equipment first removes the slag particles on the workpiece surface by knocking through a set of transverse swinging steel hammer plate brush stations, then removes the residual burrs on the workpiece surface by sanding through a set of sand belt stations, and then passes through a vientiane rolling brush station (Vientiane rolling brush station consists of 6 sets of universal sand sheet rolling brush combination, The two adjacent sand blade rolling brush rotation, sand blade rolling brush combination revolution) on the edge of the workpiece, the inner hole for high-speed centrifugal
grinding, scraping, cutting, file and other forces, no dead Angle to remove burrs, does not have any impact on the accuracy of the workpiece, so that the
edge of the workpiece, the inner hole burr removal and uniform R Angle (R Angle size can be selected by different processes and abrasive bring to achieve),
through Type machining, will not destroy the dimensional accuracy of the workpiece.At the same time, the steel hammer station, the sand belt station and
the sand sheet rolling brush station can also operate independently: the independent operation of the steel hammer station can remove the workpiece edge
hanging slag; The independent operation of the sand belt station can realize the processing of wire drawing, polishing, deburring and so on. The independent
operation of the sand blade rolling brush can achieve 360-degree non-dead Angle deburring treatment, especially for laser cutting, CNC punching under the
sheet metal, not only the burr removal is clean, and no damage to the film, the sheet metal will not be scratched. Because this device uses a special soft abrasive
wire, designed only for the characteristics of burrs, it is a non-damaging (in the case of film) sheet metal surface effect deburring equipment, and has superior
processing efficiency for special-shaped workpieces.Conveyor system table with strong permanent magnet adsorption fixed workpiece, for 50mm×50mm carbon
steel workpiece can achieve no tooling through processing. Conveying system variable frequency stepless speed regulation.Equipped with wet vacuum cleaner,
reduce safety risks, efficient treatment of grinding dust, through the top high-pressure high-flow fan grinding processing dust into the dust removal chamber,
through the water spray dust settlement in the water, the dust for environmental protection filtration and absorption, clean air discharged into the atmosphere.
For the operator to provide a good working environment, recycling grinding metal powder, to achieve environmentally friendly production.
Rubber roller + rubber roller clip feeding
){kind=link}