The main processing scope of the equipment
1. Equipment function: The whole line is a wet grinding structure, and the deburring equipment is composed of two sets of sand belt and two sets of planetary brush disk. It is mainly used for automatic deburring and polishing of carbon steel surface after stamping. Through processing, high processing efficiency. Equipped with automatic paper belt filter to handle grinding dust, safety and environmental protection.
2. Applicable material: steel plate such as carbon steel.Second, the working principle of the equipment
The equipment is composed of two sets of sand belt and two sets of planetary brush disk combination structure, through the strong permanent magnet adsorption fixed workpiece, belt conveying material. The workpiece surface is scratched and large burrs are sanded through 1 set of sanding belt stations, the surface of the workpiece is finely polished through 1 set of sanding belt, and then the surface of the workpiece is deburred and polished through 2 sets of planetary brush plates (each planetary brush plate station is composed of 4 positive and negative rotating brush plates, and the whole combination rotates) stations. The edge and inner hole of the workpiece are removed with burrs and a uniform R Angle is generated. The outlet is equipped with demagnetization device, and the processing efficiency is high.
Advantages of wet grinding:
1) The workpiece is not deformed during processing
2) Grinding dust can be completely absorbed
3) Longer service life of consumables
4) The workpiece surface finish is better
Advantages of using equipment:
1. Improve production efficiency: continuous feed through processing, can meet the needs of order processing;
2. Improve product quality: the consistency of the workpiece is good, and the surface treatment effect is far beyond the manual treatment effect;
3. Cost saving: the cost of processing the workpiece per unit area is much lower than manual processing;
4. Safety and environmental protection: dust absorption, worker operation safety, improve the working environment of workers.
| Working width |
≤280mm,350mm,450mm,650mm,800mm,1000mm |
| Machining thickness |
0.5~80mm |
| Minimum machining size |
30mm×30mm(Carbon steel workpiece) |
| Overall power |
25KW |
| Belt size |
Φ1910mm×300mm |
| Sand rolling brush size |
Φ162mm |
| Delivery speed |
0.5~6m/min Variable frequency |
| Machined thickness servo adjustment precision |
0.01mm |
| Grinding consumables |
Sand belt + rolling brush |
| contour size of the unit about |
long3800mm× wide1200mm× high2100mm |
| The weight of the whole machine is about |
3.0T |
Audited Supplier 
){kind=link}