![Lanuss Waterjet Cutting Workpiece Surface Pre Grinding and Drawing](//www.micstatic.com/athena/img/transparent.png)
Product Description
Equipment structure diagram and comparison before and after deburring processing
Working principle of equipment
The equipment first removes large burrs such as slag particles on the surface of the workpiece through a set of sand belt stations, and then works through a set of fine sand belt stations
The surface of the piece is polished, and then through six sets of universal sand blade rolling brush combination, two adjacent sand blade rolling brush positive and negative rotation, sand blade rolling brush combination male Turn, the edge of the workpiece, the inner hole for high-speed centrifugal polishing, scraping, cutting, filing and other forces, no dead Angle to remove burrs, so that the workpiece edge The edge and inner hole burrs are removed and a uniform R Angle is generated (the size of the R Angle can be achieved by selecting different processes and abrasive belts) Through processing, high processing efficiency.
At the same time, the sand belt station and the sand sheet rolling brush station can also operate independently: the independent operation of the sand belt station can realize the surface pulling of the metal sheet Silk, polishing, peeling, slag removal and other processing; The independent operation of the sand blade rolling brush can achieve 360 degrees without dead Angle deburring treatment, especially Is for laser cutting, CNC punching under the sheet metal, not only to remove the burrs clean, and no damage to the film, sheet metal parts
There will be no scratches. Because this equipment uses a special soft abrasive silk, only for the characteristics of burrs to design, so it is a non-injury (in paste In the case of film) deburring equipment for the surface effect of sheet metal parts, and has superior processing efficiency for special-shaped workpieces.Conveying system with strong magnetic adsorption fixed workpiece, for 50mm×50mm workpiece can achieve no tooling through processing, special Special workpieces can be selected supporting tooling fixed processing. Conveying system variable frequency stepless speed regulation.Equipped with wet vacuum cleaner, reduce safety risks, efficient treatment of grinding dust, through the top high-pressure high-flow fan grinding processing powder
The dust is sucked into the dust removal chamber, the dust is settled in the water through the water spray, the dust is environmentally friendly filtration and absorption, and the clean air is discharged to the atmosphere Medium. Provide a good working environment for the operator, recycle the ground metal powder, and achieve environmentally friendly production.
Basic equipment parameters:
1. Applicable scope of equipment: suitable for flat plate parts, carbon steel plate, stainless steel plate, aluminum plate, copper plate,
titanium alloy, all kinds of non-ferrous metals, rubber and plastic materials.
2. Equipment function: pre-grinding, drawing, polishing, scratching, deburring, chamfering, etc. for laser cutting, shearing, punching,
cutting, plasma cutting
3. Equipment combination: wide abrasive belt + universal roller brush single or multiple combination structure
4.Processing width of equipment: 800mm,1000mm,1350mm ,1600mm
5.Processing thickness of equipment: 0.5-100 mm
6. Feeding speed :0.5-8 m/min( variable frequency adjustable)
7. Optional feeding mode:
(1) Strong permanent magnet adsorption transport feed (suitable for carbon steel workpieces. Workpiece size ≥10 mm×10 mm)
(2) Vacuum negative pressure adsorption conveying feeding (suitable for stainless steel plate, copper plate, aluminum plate, etc.)
is not magnetically adsorbed. Workpiece size ≥50 mm×50 mm)
8. Four-column synchronous lifting, rolling brush position independent lifting, lifting servo control, accuracy 0.01 mm.
9. Machine NC PLC touch screen adjustment processing parameters.
Matching wet vacuum cleaner or industrial pulse vacuum cleaner to treat grinding dust to achieve environmental
protection production
Optional mechanism combination according
to component requirements
![Lanuss Waterjet Cutting Workpiece Surface Pre Grinding and Drawing](//www.micstatic.com/athena/img/transparent.png)
![Lanuss Waterjet Cutting Workpiece Surface Pre Grinding and Drawing](//www.micstatic.com/athena/img/transparent.png)